Overview

This article will walk you through installing the device that drivers need in order to use the MagTek eDynamo with Forte.

Disclaimer

This article is provided for educational and informational purposes only. If you are having difficulty following this guide, please reach out to Forte’s support team.

Download Links

1. You can download the driver directly from here
2. Or you can navigate to https://www.forte.net/devdocs/ and select Downloads > Drivers > eDynamo Windows Installer 
   

Instructions

1. Once you have downloaded the driver, you will need to unzip it 
   
   
   
2. Right-click the file and select Run as Administrator to start running the installation
   
   
   
3. You will get a pop-up asking you if you want to run the installer. Select Yes 
   
   
   
4. Several windows will appear. On the first screen, select Next 
   
   
   
5. Enter a username and organization 
   
   
   
6. Select Next 
   
   
   
7. Select Install 
   
   
   
8. Allow the install to run 
   
   
   
9. When complete, select Finish  
   
   
   
10. In the command window, press any key and the window will disappear 
    
    
    
11. Confirm that the driver is running in the background. Go to your Windows Search Bar and type Services 
    
    
    
12. Open the Services App 
    
    
    
13. Scroll down until you see MagTek Service 
    
    
    
14. If the service is visible and running, then the driver has been successfully installed